Type: Grafting Tool Set
Graft Diameter: 5-12 mm
Seam Width: 2 mm
Grafting Alliance Depth: 10 mm
How to use:
Step 1. The graft stock is held in a transplant tool and extruded to repeat cutting to cut the stem of the donor plant. Take care to ensure that the grooves are cut in the stock factory.
Step 2. Slide the donor rod into the groove of the original plant to match the surface as much as possible. If the inventory and the donor plant are different in size. Match only on the side.
Step 3. Place the disinfectant material around join and paste with sterile material to prevent bacterial and hygienic conditions.
Step 4. Cut the useless branches from the plants using a trimmer.
1 x Grafting Tool Kit
Please allow minor deviation due to manual measurement.
Due to the difference between different monitors in each computer, the picture may not reflect the actual color of the item.