Instant Electric Water Heater Tap

**Product Name:** Instant Electric Water Heater Tap

**Product Features:**

- Fast heating, providing 30-60℃ hot water within 3-5 seconds

- No preheating required, hot water available anytime

- Water and electricity separation design for safer use

- Leakage protection to ensure safe use

- Water flow switch for circuit safety

- Simple operation, adjustable water temperature

**Product Specifications:**

- Installation Method: Bottom water intake

- Rated Power: 3000W

- Housing Material: ABS

- Winter Temperature: 40-58℃

- Rated Voltage: 220V

- Rated Frequency: 50Hz

- Control Method: Manual

- Inner Tank Material: Stainless Steel

- Capacity: Above 150L

- Applicable Water Pressure: 0.03-0.6Mpa

- Waterproof Level: IPX4

- Power Cord Length: Approximately 1 meter

- Dimensions: Approximately 340 x 150 mm

- Net Weight: 674 grams

**Package Contents:**

- 1 Electric Water Heater Tap (EU Plug)

**Precautions:**

- **Water Temperature Reminder:**

- The power of the electric water heater tap is 3000W, (the machine requires a water pressure of about 0.15Mpa or higher to start)

- The electric water heater tap adjusts temperature by regulating the water flow size

- the water flow is fast, and hot water comes slowly

- the water flow is slow, and hot water comes quickly

- Reference for the highest water temperature in winter: around 40-55°, the highest water temperature will be affected by local temperature, voltage, and water flow

- **About Installation:**

- Please make sure to have water flowing before turning on the power!!!!

- The product must be installed vertically upwards

- Prohibited to install sideways/upside down/flat

- **About Residual Water:**

- Before each product is shipped, we conduct layer-by-layer inspections, including heating tests, leakage protection tests, and water leakage tests. It is normal to have residual water drops inside the cavity after receiving the goods