Fast Heating Tankless Water Heater - 3000W Instant Hot Water, °C/°F Switch, LCD Display, IPX4 Waterproof, Leak Protection, G1/2" Fitting for Home Use

Description & Features

Instant Hot Water: No more waiting! Simply plug into any standard wall socket, press the touch power button, and see the real-time temperature display. With 3000W high-performance heating, it quickly brings cold water to your desired constant temperature between 82.4-131°F - saving both time and energy.
Smart Display & Unit Switch: The sleek LCD screen shows real-time water temperature. Easily switch between °C and °F by long-pressing the touch button for 3-5 seconds. A lit '°C' means Celsius; unlit means Fahrenheit.
Built to Last & Safe to Use: Crafted with corrosion-resistant stainless steel cabin and ABS shell, this tankless water heater is sturdy and rustproof. It includes advanced safety protections: leakage protection, over-temperature protection, and dry-heating protection. IPX4 Waterproof performance allows you to use hot water without worrying about water droplets splashing.
Easy Installation: Features a standard G1/2" brass fitting for seamless connection to household faucets, hoses, and more. Tip: Recommend to use wiring with ≥2.5mm² cross-section and a circuit breaker >32A.
Use Anywhere, Perfect for Everyone: Great for hand washing, dishes, salon use, under-sink setups, and more. A practical and thoughtful gift for anyone who values instant hot water. Renders you warmth even in chill winter.

Specification:

Product Type: Electric Tankless Water Heater
Color: White
Material: Stainless Steel Cabin, ABS Shell, Copper Interface
Voltage: 110-130V 50/60HZ
Power: 3000W
Power Cable: 14AWG, 2.5mm2, Pure Copper Wire, 0.95mm Diameter
Inlet And Outlet Pipe Interface Specification: G1/2 Inch Interface(2cm Outer Diameter)
Water Pressure: 0.04-1.2MPA
Waterproof Rating: IPX4
Applicable Water Flow: ≥1.2L/Min
Safety Protection: The product has leakage protection and over-temperature protection. It will stop operating when the temperature exceeds 58-60°C/136.4-140℉ and will automatically resume operation after cooling.
Temperature: Fixed frequency, temperature range 28-55°C/82.4-131℉. Actual outlet water temperature is affected by inlet water temperature and water flow rate.
Touch Button: Short press to turn on/off the heater, long press to switch °C/°F
Power Cable Length: About 1.1m/3.6ft
Item Size: 19.5x11.5x6cm/7.68x4.53x2.36in
Item Weight: 945g/2.08lbs
Package Size: 24*19*10cm/9.44*7.48*3.93in
Package Weight: 1124g/2.47lbs

PackageContents:

1 x Electric Tankless Water Heater
2 x Self-Tapping Screws
2 x Plastic Anchors
1 x User Manual

Attention
* Vertical installation only. Horizontal installation is not allowed in order to avoid dry heating.
* Please make sure cold water flow though this water heater before connecting into power at your first time using.
* This electric hot water heater is recommended to be connected with wires with a cross-sectional area of ≥ 2.5 square millimeters, and connected to trip switches of over 32A for use.
* Before use, turn on the cold water tap and make sure water flows smoothly; then insert the plug into the socket and power on!
* Please ensure that the water pressure is stable so that the water heater can work properly! (If the water temperature is too high and the water flow rate is too low, it will cause the water heater to dry out; And opening the hot water valve directly without cold water can also cause dry burning!)
* Only suitable for kitchen and bathroom sinks, not for showers. Showering requires a large amount of water, and this hot water heater may not reach the desired temperature.
* When the weather is very cold, to make the water temperature a bit warmer, you can reduce the water flow—for example, by turning the faucet down slightly.